Pneumatic Chuck

The chuck can respond to clamping instructions quickly and protect tube surface from scratch because of its collets equaling to tube diameter. Changing claws only takes 3min every time.

  • Max. no-load speed 100m/min
  • Max. rotating speed of chuck 150r/min
  • Max. acceleration 1.0G

Alpha T Bus CNC System

Alpha T, self-developed by HSG LASER, can make data transmission rapid, stable and accurate only via a network cable as a technically advanced bus system.

  • Touch screen with easy operation
  • Active obstacle avoidance
  • Real-time monitoring of core components
  • Capacity expansion available due to multiports reserved

Cutting with Short Tailing

When tube fails to be pushed for cutting by loading device, tubes behind will drive the former to move on, as thus, the tube is cut as far as possible.

  • Min. tailing 60mm
  • Cut down material wastage
  • Free from tailing reprocessing

Automatic Loading Equipment

  • * Tubes are usually loaded to material laying area by transmission mechanism of which limiting device can make tubes in order.
  • * Tubes are clamped by 6 loading rollers that need no reset in a loading cycle, resulting in less waiting time and high cutting efficiency.

Technical Parameter

  • Technical Parameters
  • Power
  • Max. Rotating Speed of Chucks
  • Max. No-load Speed
  • Max. Acceleration
  • X/Y-axis Positioning Accuracy
  • X/Y-axis Repositioning Accuracy
  • Cutting Capacity of Round Tube
  • Cutting Capacity of Square Tube
  • Cutting Capacity of Rectangular Tube
  • Max. Length of Single Tube
  • Min. Length of Tailing
  • Overall Dimensions (L*W*H)

*The above data are for reference only, subject to the actual product!

Ask For The Best Price

Send Us A Message